AIC XD1100-1102 Bedienungsanleitung PDF herunterladen (Seite 3)

1U10 RBOD User’s Manual

SAFETY PRECAUTIONS

Before getting started, please read the following important cautions:

• All cautions and warnings on the equipment or in the manuals should be noted.

• Most electronic components are sensitive to electrical static discharge, therefore, be sure to ground

yourself at all times when installing the internal components.

• Use a grounding wrist strap and place all electronic components in static-shielded devices. Grounding

wrist straps can be purchased in any electronic supply store.

• Be sure to turn off the power and then disconnect the power cords from your system before performing

any installation or servicing. A sudden surge of power could damage sensitive electronic components.

• Do not open the system’s top cover. If opening the cover for maintenance is a must, only a trained

technician should do so. Integrated circuits on computer boards are sensitive to static electricity. Before

handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on your body.

• Place this equipment on a reliable surface when install. A drop or fall could cause injury.

• Please keep this equipment from away humidity.

• Carefully mount the equipment into the rack, in such manner, that it won’t be hazardous due to uneven

mechanical loading.

• Do not leave this equipment in an environment unconditioned, out of operation or storage temperature

range may damage the equipment.

• This equipment is to be installed for operation in an environment with maximum ambient temperature

below 35°C.

• The openings on the enclosure are for air convection to protect the equipment from overheating. DO

NOT COVER THE OPENINGS.

• Never pour any liquid into ventilation openings. This could cause fire or electrical shock.

• Make sure the voltage of the power source is within the specification on the label when connecting the

equipment to the power outlet. The current load and output power of loads shall be within the

specification.

• This equipment must be connected to reliable grounding before using. Pay special attention to power

supplied other than direct connections, e.g. using of power strips.

• Place the power cord out of the way of foot traffic. Do not place anything over the power cord. The

power cord must be rated for the product, voltage and current marked on the product’s electrical ratings

label. The voltage and current rating of the cord should be greater than the voltage and current rating

marked on the product.

• If the equipment is not used for a long time, disconnect the equipment from mains to avoid being

damaged by transient over-voltage.

• Never open the equipment. For safety reasons, only qualified service personnel should open the

equipment.

• If one of the following situations arise, the equipment should be checked by service personnel:

¾ The power cord or plug is damaged.

¾ Liquid has penetrated the equipment.

¾ The equipment has been exposed to moisture.

¾ The equipment does not work well or will not work according to its user manual.

¾ The equipment has been dropped and/or damaged.

¾ The equipment has obvious signs of breakage.

Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid or detergent

for cleaning. The use of a moisture sheet or cloth is recommended for cleaning.

Product features and specifications are subject to change without notice.

1 2 3 4 5 6 7 8 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

AIC XD1100-1102 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern